1. D1-4" camlock Spindle with 40 mm (1 9/16") spindle bore
2. Spindle Speeds: 80-2,000 RPM ( 9 speed)
3. Swing over Bed: 360 mm (14")
4. Swing over Cross Slide: 225 mm (8 3/4")
5. Cross Slide Travel: 175 mm (6 7/8")
6. Bed Length-Longitudinal Travel: 1000 mm (40")
7. Hardened and ground bed ways
8. Hardened and ground gears in headstock
9. Rapid foot break
10. Precision taper rollers bearing
11. Feed rod is equipped w/ over load safety clutch
12. Apron is equipped with an interlocking device to prevent feeding inter-grearing during automatic feeding and the half-nut operation.

BRIEF SPECIFICATION:

Model

1440LS

Basic dimension

Swing over bed

14 inch

Swing over gap

20-3/4 inch

Swing over saddle

8-3/4 inch

Distance between centers

40 inch

Bed

Width of bed ways

7-9/16 inch

Top slide travel:

4 inch

Cross slide travel:

6-7/8 inch

Tailstock

Spindle nose mounting

STD: D1-4

Spindle bore

1-9/16 inch

Spindle nose taper & sleeve:

Outer MT #5, Inner MT #3

Range of spindle speeds

9 Speed gear change

82 to 2000 RPM

Thread & feed:

Range of inch threads:

4~56 T.P.I (32 kinds)

Range of metric threads:

0.4~7.0 (32 kinds)

Range of longitudinal feeds:

0.0016"~0.03" /rev

Range of cross feeds:

0.0008"~0.015" /rev

Tailstock quill taper

M.T.#3

Tailstock quill travel

4-3/8 inch

Motor

Main spindle motor

3 HP. 2.2 KW

Coolant pump motor

1/8 HP

Dimensions & weights:

Machine net weight

1,584 lbs. 720 kgs.

Packing dimensions:

73" x 30" x 58"

STANDARD ACCESSORIES:

Tools & box

Coolant system

Ø 10" Face plate

Operation manual

Splash guard

Ø 6" 3-Jaw chuck with back plate

Dead centers MT#3

T-Slotted top slide

Ø 8" 4-Jaw chuck with back plate

One-shot lube

Drive plate

Steady rest (1/2" – 4-1/2")

Foot brake system

Thread dial indicator

Dual inch / metric dials