Cadillac AC-2100 Series

AC-2100 series Flat-Bed CNC Lathe

Model AC-2140 / AC-2160 / AC-2180
Spindle Bore 85 mm (3") 105 mm (4") (opt.)
Height of Centers 270 x 1000 / 1500 / 2000 mm
Spindle speeds (rpm) H: 2250 - 491
M: 490 - 126
L: 125 - 27		 H: 1500 - 331
M: 330 - 93
L: 92- 20
• FAGOR Control is standard, but ANILAM, FANUC & SIEMENS Control is available on request.
• Spindle auto speed shifting (3 steps) and CNC controlling
• All casting are made of high tensile Meehanite cast iron which are annealed treatment to eliminate internal residual stress
• Wide bed and box constructed, bed ways are high frequency heat treated, precision ground etc., to provide stability at high speed running or deep cut
• Spindle & gear are made of CR-MO alloy steel which are carburizing & precisely ground, forced lubricating & oil bathed combined in headstock which can be prolonged servicing life
• Three point support on the spindle with two taper roller bearings and one roller bearing to assure the accuracy & rigidity
• AC-2100 spindle bore 85 mm series with hi-spindle speed 2250 rpm
• Gap bed on request
• High precision ball screw
• CSS available
• Heavy duty tailstock
• V-8 turret tool post on request
• Electric 4-Way tool post on request
• External spindle cooling system on request
• Double chuck system ( over 105 mm spindle bore ) on request
• Tailstock spindle dia. 75 mm
SPECIFICATIONS

Model \ Description

AC-2140

AC-2160

AC-2180
Working Capacity  
Swing over bed

540 mm

Center height

270 mm

Swing over cross slide

310 mm

Dist. between centers

1000 mm

1500 mm

2000 mm

Width of bed

350 mm

Headstock  
Spindle speeds (rpm)
H: 2250 - 491
M: 490 - 126
L: 125 - 27		 H: 1500 - 331
M: 330 - 93
L: 92- 20
Spindle nose
D1-8 A2-11
Spindle bore
85mm (3") 105mm (4") opt
Saddle  
Longitudinal travel (Z-axis)

810mm

1310mm

1810mm

Cross slide travel (X-axis)

350 mm
Ball screw (Dia. x pitch)

X: 25x5 mm, Z: 40x10 mm
Tailstock  
Spindle travel

170 mm
Spindle dia.

75 mm
Taper in spindle

MT#5
Motor  
Spindle motor

AC 10HP or 15HP(opt)
Z-axis drive motor

6.3 NM / Pitch 10 mm 1:2
X-axis drive motor

6.3 NM / Pitch 5 mm 1:1
Coolant pump motor

1/6HP
X.Z Feeds  
Z-axis rapid travel

7 m/min

X-axis rapid travel

5 m/min

Machine Weight  
N.W.(Approx.)

3100 kgs

3400 kgs

3700 kgs

• CNC & Manual operation
• Three steps speed range and vari-speed in stepless, but H-M-L speed range change which controlled by CNC
• Run first component manually and then the rest automatically
• Metric threading
• Easy manual turning of radial, chamfering, taper, facing and grooving
• Tool radius & geometry compensation
• Internal digital readout
• Constant surface speed for model with infinitive variable speed
• Integrated PLC
• 8 bit bus, 32K RAM
• Serial port (RS-232 communication)
• Teach-in mode
• Semiautomatic, automatic (Cycle) and part program modes
• Automatic acceleration/deceleration
• Rapid travels
• Self diagnostic routines
• Automatic home searching
• Program input RS-232
Note: We have the right to modify the specifications or designs. if there are subjected to change, without prior notice.