Cadillac AC-2500 Series

AC-2500 series Flat-Bed CNC Lathe

Model AC-2540 / AC-2560 / AC-2580
Spindle Bore 85 mm (3") 105 mm (4") opt 153 mm (6") opt
Height of Centers 315 x 1000 / 1500 / 2000 rpm
Spindle Speeds
(rpm) 		H: 2250 - 491
M: 490 - 126
L: 125 - 27		 H: 1500 - 331
M: 330 - 93
L: 92- 20		 H: 800 - 176
M: 175 - 53
L: 52-10
• FAGOR Control is standard, but ANILAM, FANUC & SIEMENS Control is available on request.
• Spindle auto speed shifting (3 steps) and CNC controlling.
• All casting are made of high tensile Meehanite cast iron which are annealed treatment to eliminate internal residual stress.
• Wide bed and box constructed, bed ways are high frequency heat treated, precision ground etc., to provide stability at high speed running or deep cut.
• Spindle & gear are made of CR-MO alloy steel which are carburizing & precisely ground, forced lubricating & oil bathed combined in headstock which can be prolonged servicing life.
• Three point support on the spindle with two taper roller bearings and one roller bearing to assure the accuracy & rigidity.
• AC-2500 spindle bore 85mm series with hi-spindle speed 2250rpm.
• Gap bed on request.
• High precision ball screw.
• CSS available.
• Heavy duty tailstock
• V-8 turret tool post on request
• Electric 4-Way tool post on request
• External spindle cooling system on request
• Double chuck system ( over 105 mm spindle bore ) on request
• Tailstock spindle dia. 75 mm
SPECIFICATIONS

Model \ Description

AC-2540

AC-2560

AC-2580

Working Capacity  
Swing over bed

630 mm

Center height

315 mm
Swing over cross slide

400 mm

Dist. between centers

1000 mm

1500 mm

2000 mm

Width of bed

350 mm

Headstock  
Spindle speeds (rpm)
H: 2250 - 491
M: 490 - 126
L: 125 - 27		 H: 1500 - 331
M: 330 - 93
L: 92- 20		 H: 800 - 176
M: 175 - 53
L: 52- 10
Spindle nose
D1-8 A2-11 A2-11
Spindle bore
85 mm (3") 105 mm (4") opt 153 mm(6") opt
Saddle  
Longitudinal travel (Z-axis)

810mm

1310mm

1810mm

Cross slide travel (X-axis)

350 mm

Ball screw (Dia. x pitch)

X: 25x5 mm, Z: 40x10 mm

Tailstock  
Spindle travel

170 mm

Spindle dia.

75 mm

Taper in spindle

MT#5

Motor  
Spindle motor

AC 10HP or 15HP(opt)
Z-axis drive motor

6.3 NM / Pitch 10 mm 1:2
X-axis drive motor

6.3 NM / Pitch 5 mm 1:1
Coolant pump motor

1/6Hp

X.Z Feeds  
Z-axis rapid travel

7 m/min

X-axis rapid travel

5 m/min

Machine Weight  
N.W.(Approx.)

3200 kgs

3500 kgs

3800 kgs
• CNC & Manual operation
• Three steps speed range and vari-speed in stepless, but H-M-L speed range change which controlled by CNC
• Run first component manually and then the rest automatically
• Metric threading
• Easy manual turning of radial, chamfering, taper, facing and grooving
• Tool radius & geometry compensation
• Internal digital readout
• Constant surface speed for model with infinitive variable speed
• Integrated PLC
• 8 bit bus, 32K RAM
• Serial port (RS-232 communication)
• Teach-in mode
• Semiautomatic, automatic (Cycle) and part program modes
• Automatic acceleration/deceleration
• Rapid travels
• Self diagnostic routines
• Automatic home searching
• Program input RS-232
• 1.44MB floppy disk drive (option)
• External DNC communication software
• Tailstock spindle dia. 75 mm
Note: We have the right to modify the specifications or designs. if there are subjected to change, without prior notice