- D-1-6″ camlock Spindle with 2 3/16″ spindle bore
- Spindle Speeds: 50-2,000 RPM ( 9 speed)
- Swing over Bed: 406 mm (16″)
- Swing over Cross Slide: 225 mm (8 3/4″)
- Cross Slide Travel: 203 mm (8″)
- Bed Length-Longitudinal Travel: 1000 mm (40″)
- Hardened and ground bed ways
- Hardened and ground gears in headstock
- Rapid foot break
- Precision taper rollers bearing
- Feed rod is equipped w/ over load safety clutch
- Apron is equipped with an interlocking device to prevent
feeding inter-gearing during automatic feeding and the half-nut operation.
Click image to download pdf